Finish of Sunrez Infusion System (1 hour). Note the (not very) complicated machinery required for Sunrez Infusion System. |
Light curing of Sunrez Infusion System. 8 lamp @ 400 watt ea. Sunrez light fixture was used to cure the part progressively. |
Finished Main Deck with stiffeners on underside. 100% with Sunrez Infusion System. Total shrinkage was less than 1/8 inch over 30 ft. |
Laying dry fiberglass fabric into hull mold. Hull mold is 28' long 10' deep and 20' wide. (Notice high tech gantry system for laying fiber). |
Laminate in place with spiral wrap and Film Tech textured bag in position. Ready for Sunrez Infusion System. |
Sunrez Infusion System almost completed. Infusion time was under 3 hours for approx. 750 square feet of 3/8+ inch thick laminate. |
